Now the cable harness for the Jux is halfway produced, which means that I have
a noodle incident on my workbench.
But after some combing and wrapping the harness is ready to go in the Jux.
We use a special tape for the harness to let it look a little bit retro, and the
charging cables are a little beefed up for better juice to the battery.
We also included a couple of extra outlets for battery and ignition feed if
something extra is coming up down the road. And there is connectors for
our special turnsignal gizmo…if ever needed.
The electrical system is based on our EASY REWIRING HOTROD KIT,
that has gotten a few alterations but the base is the 7 fuses 2 relays central
that is going to be mounted inside the console.
For the front we have chosen cotton wrapped cables for the engine to get
a cooler retro style, we also included turn signal wires if ever needed.
The next step will be to lay out the harness in the Jux and start cutting
cables and crimping terminals for the contacts and bulb holders.
More updates to come
Micke the wire guy
Inga kommentarer:
Skicka en kommentar